Hook up old telephone wires, how to install a phone jack
Try a second phone which you know to work, and if there still seems to be no service on the line, the problem is probably on the phone company's side of the network interface device.
Computer hook up CAT-5 wires are used to connect your computer to the module.
You will need to call your service provider and tell them that you already checked your line and it is dead at the demark.
If the phone doesn't work, either your phone is broken or there's a problem in the phone company's network.
Who wrote this page?
Buy me a beer! To the best of my knowledge, all of the information on this page is correct, and it is provided in hope that it will be useful.
It should be plainly marked as to what is the customer side. In years gone past, it was the responsibility of the phone company not only to bring phone service to your house but to do the phone wiring within your house as well.
Modular jacks Two gotchas when buying modular jacks.
For ordinary phone equipment such a modem, however, you have to convert a "Line 1" jack to a "Line 2" jack. On older interface boxes without a test jack, unscrew the terminals and detach the wires, remembering which one went on which terminal.
Use this information at your own risk.
If you want to set up communication lines and be ready for anything that comes along this century, you need a system that will allow you to integrate, connect, route and modernize telephone, TV, Internet and all future data lines.
I can't be a free help desk for the nation.
Standard Telephone Wiring Color Code.
Once there is dial tone, the phone is usable for a line test. This module snaps into the panel and contains the phone terminals and the main cable splitter block.
Second, you can buy modular jacks either with or without the wiring block this is the heavy plastic piece which you mount to the wall, with screws to attach the wires to; see the picture higher up on the page. So how can you tell whose problem it is?
Required Tools for this Project
Here's the basic hardware you'll need: Star topology potentially uses a good bit more wire, but it is easier to troubleshoot because each jack is independent of the others.
I'm not familiar with the phone wiring conventions outside the U.
No Dial Tone If there is no dial tone when the phone is taken off the hook, there is probably a phone line problem.
If the line still dose not work, it is a phone company problem.